The Maintenance of Earth Station Antenna

The easy maintenance for the planet station antenna is able to reduce the antenna failing likelihood and increase the antenna existence, so a consistent and complete antenna upkeep preparing will probably be helpful for the antenna normal operations.

Proper maintenance planning is a kind of business insurance policy. Examine the completion of the complete construction and make sure the conventional operational capability by the simple and low-charge surface area upkeep; Examine the power overall performance, and comply with the constant maintenance regulation within the produce operating maintenance guide in order to minimize the occurrence of antenna failure.

Our company review many years experience of production and maintenance of Earth Station Antenna and combined with the opinions of countless buyers from all over the world to create the every day evaluation guidebook. We hope this guide may help the antenna end users.

octa air philippines

  1. Surface Routine maintenance

Look into the comprehensive color electroplating and surface area, in addition to fixed structure. First rub the rust spot on the electroplating surface by metal wire brush or abrasive paper, and then coat a layer of zinc-rich coating or a layer of rust inhibitor which will not require the complete clearance of the rust.

The user should repair it even if only a little of the finish peeling or color fading, or it will become more and more serious. Because the wrong coating method will affect the signals accept, and the user must accord with the antenna manufacturer regulation for the paint coating and surface specification. For example, the dim-colored antenna reflector types of surface can process effortlessly, so it can bring about higher heat, which can cause the signal distortion. An excessive amount of guide fresh paint can certainly make the impulses decrease by attenuation or scattering.

  1. Antenna Fasteners

The nuts, rivets, bolts and other fasteners within the installment is going to be impacted by atmospheric result or internal rust. Regardless of any corrosive factors as well as the fault installment will probably be found in the routine maintenance. At the moment the users need to tighten up the release nut products and replace the rust, corrosive and lost components.

With the American Society for Testing and Materials Institute A325 or other occasions of friction components, the user must replace the loosen or corrosive components, because in the process of re-tightening it will make the fasteners get the reuse term. Also the corrosive A325 metallic pieces ought to be substituted not really tightened.

Often there are pins inserting inside the pivots in the adaptable antenna bracket. Check if the actions of such jointing are flexible, and lubricate the oils by a oil-pistol with essential oil jet. If the antenna rotates not flexibly, the user should replace the pin.

Look into the aluminum fasteners in the antenna reflector and back again structure. Other than United states Modern society for Materials and Testing Institute A325 has to be swap, the user can tighten up the release elements. The lost, rust and corrosive fasteners must be changed. These check out processes will also be ideal for the functional program when putting together the antenna, in addition to aiding the reflector and reflector support.

  1. Floor

Irrespective of how high the complexes, the antenna and bracket must be grounded to prevent the super attacks. Examine when the technical of grounding process and no mechanical relationship are hooked up.

Evaluate when the grounding link is attached with the earth loop impedance device. In accordance with the test effects the person can determine the price of the excavating job. Verify that the mechanical grounding parts are oxidation, corrosive or loosen. Change the corrosion and corrosive fasteners so as to restrict the inductance value.

Adjust it while fixing theĀ octa air review antenna if the anchor bolts prevent to adjust the pedal level. After adjusting, check if the cement sealing of the antenna foundation and anchor bolts shift and crush. If it is damaged, even a little, also should be repaired. After altering, the controller ought to be programmed once more.